Brian Tooley Racing BTR RED HOT Camshaft Kit | .625″ Beehive Springs | Valve Seals | Timing Gasket | +50HP +11TQ | 221/24X .619/.617 113 LSA | Fits GM 4.8L 5.3L 6.0L 6.2L LM7 LC9 LQ4 LQ9 L92 L96

Description

The Brian Tooley Racing Red Hot is one of the most talked about camshafts in the LS performance community right now — and this kit gives you everything needed to get it installed and supported properly from day one. The Red Hot was engineered to do something most cams can’t: deliver more power than BTR’s existing Stage 2 profiles while using less intake duration, resulting in a broader, more usable powerband that works equally well in naturally aspirated and lightly boosted applications. With dyno-proven gains of 50+ rear wheel horsepower and 11+ lb-ft of torque, a 113° LSA that keeps the powerband broad and accessible, and .619″/.617″ valve lift, the Red Hot is the cam for builders who want serious real-world performance without sacrificing street manners. Fire it up and you will know immediately this isn’t a stock LS anymore.This kit pairs the Red Hot with a clean, matched valvetrain support package. The .625″ beehive valve springs are purpose-matched to the Red Hot’s .619″/.617″ lift profile, delivering correct spring pressure and reliable high-RPM operation while keeping valvetrain mass lower than a dual spring setup. Premium valve stem seals ensure a clean, oil-tight build from day one, and the front timing cover gasket means your install is complete without any last-minute trips to the parts store. Every component in this kit is selected to work together seamlessly so you can focus on the build — not the sourcing.This kit is compatible with 1999–2013 GM 4.8L, 5.3L, 6.0L, and 6.2L Vortec LS engines across both cathedral port and rectangle port cylinder head families. A professional tune is required for both automatic and manual applications. A 2,800–3,200 RPM stall converter is recommended for automatic vehicles for best performance. Measuring piston-to-valve clearance prior to installation is always recommended. Big power. Broad powerband. Built for the street.

This kit pairs the BTR Stage 3 Truck cam with a matched valvetrain package to support it from day one. The PAC1219-style beehive valve springs are purpose-matched to this cam’s .549″/.549″ lift profile, delivering the correct seat and open pressures for reliable high-RPM operation. Premium valve stem seals are included for a clean, oil-tight build, and the front timing cover gasket ensures your install is complete without any last-minute trips to the parts store. Every component in this kit is selected to work together seamlessly so you can focus on the build — not the sourcing.

This kit is compatible with 1999–2013 GM 4.8L, 5.3L, 6.0L, and 6.2L Vortec LS engines. A professional tune is required for both automatic and manual applications. A 2,500–3,000 RPM stall converter is recommended for automatic vehicles for best performance. Measuring piston-to-valve clearance prior to installation is always recommended. Big power. Broad powerband. Built for the street.

• COMPLETE BTR RED HOT CAM KIT – Trusted by LS builders nationwide, this kit includes everything a professional installer would spec: Brian Tooley Racing Red Hot Camshaft (221/24X, .619″/.617″, 113 LSA, 3-Bolt, Made in USA), .625″ Beehive Valve Springs, Premium Valve Stem Seals, and a Front Timing Cover Gasket. One order, one shipment, zero guesswork.
• DYNO PROVEN +50HP +11TQ – MORE POWER WITH LESS DURATION – The BTR Red Hot delivers dyno-proven gains of 50+ rear wheel horsepower and 11+ lb-ft of torque while using less intake duration than BTR’s existing Stage 2 profiles. The result is a broader, more usable powerband that pulls strong in real-world driving conditions — not just on a dyno sheet. This is big power with street manners built right in.
• BTR RED HOT – ENGINEERED FOR N/A AND BOOSTED BUILDS – Most performance cams serve one application. The Red Hot serves two. The 113° LSA and .619″/.617″ lift profile were engineered to deliver exceptional power gains in both naturally aspirated and lightly boosted LS applications — making this one of the most versatile performance cam grinds in the BTR lineup and one of the fastest growing cams in the LS community.
• MATCHED .625″ BEEHIVE SPRINGS + VALVE STEM SEALS – Purpose-matched to the Red Hot’s .619″/.617″ lift profile for correct spring pressure and reliable high-RPM operation. Lighter than a dual spring setup, beehive springs reduce valvetrain mass while delivering the control this cam demands at high RPM. Premium valve stem seals and front timing cover gasket included for a complete professional install.
• CAM SPECS – 221°/24X° Duration at .050″, .619″/.617″ Valve Lift, 113° LSA, 3-Bolt Pattern. A 2,800–3,200 RPM stall converter is recommended for automatic applications. Compatible with beehive spring setups — no dual spring kit required. Professional tune required for all applications.