BTR Brian Tooley RED HOT Cam Kit 221/24X .619/.617 113 LSA + Trunnion Kit + .660 Dual Springs + Steel Retainers + Pushrods – Fits 4.8L 5.3L 6.0L 6.2L LM7 LR4 LQ4 LQ9 LS1 LY6 L92 – +50HP

Description

The Brian Tooley Racing BTR Red Hot is one of the fastest growing cams in the LS community — delivering dyno-proven gains of 50+ rear wheel horsepower and 11+ lb-ft of torque while using less intake duration than BTR’s existing Stage 2 profiles. Featuring 221/24X duration at .050″, .619″/.617″ asymmetric valve lift, and 113 LSA, the Red Hot delivers a broader more usable powerband that pulls strong in real-world driving conditions — not just on a dyno sheet. Most performance cams serve one application — the Red Hot serves two. The 113 LSA and .619″/.617″ lift profile were engineered to deliver exceptional power gains in both naturally aspirated and lightly boosted LS applications — making this one of the most versatile performance cam grinds in the entire BTR lineup. This complete kit includes everything a professional installer would spec — BTR Red Hot camshaft, .660″ dual valve spring kit with steel retainers and locks, hardened chromoly pushrods at 7.400″ length and 0.080″ wall thickness, premium valve stem seals, and a premium LS rocker arm trunnion upgrade kit. One order, one shipment, zero guesswork. Lifetime warranty if installed by a certified machinist.

The .660″ dual valve spring kit with steel retainers and locks delivers the seat and open pressures needed for reliable high-RPM operation at the Red Hot’s .619″/.617″ lift level — a serious spring package for a serious cam with no additional parts needed for a complete professional spring installation. The hardened chromoly pushrods at 7.400″ length and 0.080″ wall thickness are built for the demands of a high lift performance cam like the Red Hot — stock pushrods flex under load and these don’t. The premium LS rocker arm trunnion upgrade kit converts your stock LS rocker arms into captured roller bearing rocker arms — eliminating the factory failure point that has caused catastrophic engine damage in countless LS builds. Whether you are building a naturally aspirated 5.3L cam swap, a 6.0L LQ4 truck upgrade, a lightly boosted 4.8L build, or a turbocharged 6.2L LS performance build — the BTR Red Hot delivers exceptional power gains across the entire RPM range. Brian Tooley Racing camshafts are designed and manufactured in the USA — backed by extensive in-house dyno development and real world engine testing.

Compatible with 1999–2013 GM 4.8L, 5.3L, 6.0L, and 6.2L Vortec V8 engines including LR4, LM7, L59, LM4, L33, LH6, LC9, LY5, LMG, LQ4, LQ9, L76, L92, and L96. Fits Silverado, Sierra, Tahoe, Suburban, Yukon, Yukon XL, Escalade, Avalanche, TrailBlazer SS, Pontiac GTO, Pontiac G8, Express Van, and Savana Van. A 2,800–3,200 RPM stall converter is recommended for automatic applications. Professional tune required for all applications. Fire it up and the Red Hot delivers a confident aggressive idle that lets everyone nearby know this LS has been properly built — past converter stall the throttle response is sharp, the power is broad and strong, and the pull stays relentless all the way through the RPM range. Big power. Broad powerband. Built for the street.

• COMPLETE BTR RED HOT CAM KIT – Brian Tooley Racing BTR Red Hot Camshaft (221/24X, .619″/.617″, 113 LSA, 3-Bolt, Made in USA), .660″ Dual Valve Spring Kit with Steel Retainers and Locks, Hardened Chromoly Pushrods (7.400″, 0.080″ wall), Premium Valve Stem Seals, and a Premium LS Rocker Arm Trunnion Upgrade Kit. Lifetime warranty if installed by a certified machinist. Most complete BTR Red Hot cam kit for 4.8L 5.3L 6.0L and 6.2L LS cam swaps — one order one shipment zero guesswork.
• DYNO PROVEN +50HP +11TQ – MORE POWER WITH LESS DURATION – 221/24X Duration at .050″, .619″/.617″ Asymmetric Valve Lift, 113 LSA, 3-Bolt Pattern. Dyno-proven gains of 50+ rear wheel horsepower and 11+ lb-ft of torque — using less intake duration than BTR’s existing Stage 2 profiles. The result is a broader more usable powerband that pulls strong in real-world driving conditions on any 4.8L 5.3L 6.0L or 6.2L LS build. Big power with street manners built right in.
• BTR RED HOT – ENGINEERED FOR N/A AND BOOSTED BUILDS – Most performance cams serve one application — the BTR Red Hot serves two. The 113 LSA and .619″/.617″ asymmetric lift profile were engineered to deliver exceptional power gains in both naturally aspirated and lightly boosted LS applications — making this one of the most versatile performance cam grinds in the entire BTR lineup. One of the fastest growing cams in the LS community for 4.8L 5.3L 6.0L and 6.2L builds running N/A or boost.
• PREMIUM LS ROCKER ARM TRUNNION UPGRADE KIT – DO NOT SKIP THIS ON YOUR LS BUILD – The factory LS rocker arm trunnion is a known failure point across the entire LS engine family. When the factory pressed-in needle bearings fail they send small bearings through the entire engine causing catastrophic damage to your 4.8L 5.3L 6.0L or 6.2L LS build. This retrofit trunnion kit converts stock LS rocker arms into captured roller bearing rocker arms — eliminating the factory failure point entirely. Trusted in everything from stock 4.8L daily drivers to 1,000+ horsepower turbo motors.
• PRECISION-SPEC .660″ DUAL VALVE SPRINGS + STEEL RETAINERS + LOCKS – A serious spring package for a serious cam — the .660″ dual valve springs deliver the seat and open pressures needed for reliable high-RPM operation at the Red Hot’s .619″/.617″ lift level. Steel retainers and locks included for a complete professional spring installation — no additional parts needed. Everything needed for a complete professional BTR Red Hot LS cam swap install is right here in one box with zero trips to additional suppliers.